Honeycomb For Filtering And Purification
Aluminum Honeycomb for diversion, purification, and filtration
Honeycomb for diversion, purification, and filtration
Standard specification for the applications:
Aluminum alloy: 3003H18, 5052H18
Cellsize for the applications : 1/30",1/25",1/15",1/8",1/6",1/5"
Foil thickness: 0.04mm, 0.06mm
Honeycomb structures have the geometry of a honeycomb to allow the minimization of the amount of used material to reach minimal weight and minimal material cost. The geometry of honeycomb structures can vary widely but the common feature of all such structures is an array of hollow cells formed between thin vertical walls. A honeycomb shaped structure provides a material with minimal density and relative high out-of-plane compression properties and out-of-plane shear properties.
Aluminum honeycomb is a lightweight core material offering excellent strength and good corrosion resistance for industrial applications at low cost. It is usually made from 3003 or 5052 aluminum alloy foil.
Micro cellsize honeycomb produces highest surface-to-volume ratio. Dut to its sharp, clear cells and with no burr, it is widely used for air diversion, purification, and filtration in in air purifier, refrigerator, air-conditioning, warm air machine and respirator.
Cells contained per square inch
Cells/ square inch
Huarui Honeycomb is well-known as one of the largest manufacturers and suppliers of honeycomb for filtering and purification in China. We have a professional factory working effectively. Welcome to buy high quality and durable honeycomb for filtering and purification at competitive with us and we can also offer the quotation consultation.
Generation introduction of aluminum honeycomb
Huarui aluminum honeycomb core is adhesively-bonded of the aluminum foil, which produces one of the highest strength/weight and the highest surface-to –volume ratio of any structural material. Our aluminum honeycomb is made from 3003H18 and 5052H18 aluminum alloy foil.
Aluminum honeycomb core slices are cut from aluminum honeycomb blocks and its thickness is available from 1.5mm to 500mm. Thickness tolerance +/- 0.2mm
Huarui can provide special process per requirements, say grooving, punching holes,notch,cut to size.
Aluminum honeycomb specifications:
1.Material type: A3003H18 / 5052H18
2.Cell side length (mm): 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.5, 1.83, 2, 2.5, 3, 4, 5, 6, 7.5, 10, 12, 15 mm (cell size=cell side length/1.732)；Cell Size (inch): 1/30”, 1/25”, 1/20”, 1/18”, 1/16”, 1/15”, 1/10”, 1/8”, 1/6”, 1/5”, ¼”, 1/3”, 3/8”, ½”, ¾”, 1”
3.Foil thickness: 0.025-0.08 mm, 0.1mm
4.Supplied in: Blocks, unexpanded slices or expanded sheets (Perforated or Non Perforated)
5.Height/Sheet Thickness: 1.5mm to 500mm
6.Max Sheet Sizes: 1700mm (L) x 8000mm (W)
Max expanded size(mm)
Aluminum honeycomb features:
1.Lightweight & Strong
2.Excellent thermal and electric conductivity
3.Good sound insulation performance
6.Moisture and corrosion resistant
7.High compression & shear strength
Aluminum honeycomb applications:
1.Aircraft panels and Lightweight Train Panels/Truck Panels
2.Marine Panels (Commercial vessels and naval vessel bulkheads)
3.And Railcar panels (Doors/Floors and Energy Absorbers/Bumpers)
4.Architectural/Building structural panels (Exterior architectural curtain wall panels)
5.Honeycomb table of Industrial equipment (Sacrificial Laser beds and Tables for laser cutting application)
6.Skis and snowboards
7.Flow straightness for air or fluids/ Air, water, fluid, and light directionalization
8.Heat exchanging/ heating, ventilation, air conditioning equipment and devices
9.RFI/EMC Shielded Vents (Electronic shielding enclosures)
10.Light collimation/ lighting/Illumination Separator
11.Honeycomb Energy Absorbers/ Energy absorption protective structures
12.Laminar Air Flow units/Air Ventilation and purification
13.Sandwich Panels/Honeycomb Composite Panels, Wall ceiling and partition panels
14.Clean Room Panels
18.Honeycomb Grid for Photography Application