Home > Products > aluminum honeycomb core filtering factory

aluminum honeycomb core filtering factory

  • FRP Honeycomb Compoiste Panel

    Contact NowFRP Honeycomb Compoiste PanelFRP(Fiberglass Reinforced Plastics) honeycomb composite panel is made of fiberglass skins on both sides and honeycomb core materials in the middle. FRP has lower density and better performance on heat insulation than aluminum sheet. Fiberglass honeycomb composite panel is mainly used as...

  • Slant Aluminum Honeycomb

    Contact NowSlant Aluminum HoneycombSlant aluminum honeycomb ( 30° 45° 60° ) The most commonly used type of vent is based on aluminum honeycomb mounted in an extruded aluminum frame. The honeycomb agent has a very high open area and therefore allows good air flow with minimal pressure drop. In order to achieve the best shielding...

  • Sandstone Honeycomb Composite Panel

    Contact NowSandstone Honeycomb Composite PanelStone Honeycomb Panels are sandwich panels made up of a thin natural stone veneer reinforced with an aluminum honeycomb backing. The stone veneer can be almost any stone including granite, marble, limestone, travertine and onyx. 1) Face material: 3- 6 mm thick natural stone veneer / porcelain...

  • Aluminum Honeycomb Ceilling Panels

    Contact NowAluminum Honeycomb Ceilling PanelsAluminum honeycomb ceiling panels can act as a means of straightening and directing air in free atmosphere and ducts.

  • Aluminum Honeycomb Composite Panels

    Contact NowAluminum Honeycomb Composite PanelsAluminum Honeycomb Composite Panels Aluminum honeycomb panels are sandwich-structured composites with honeycomb cores. They are manufactured by using a variety of different materials, depending on the intended application and required characteristics, from paper or thermoplastics, used for low...

  • Aluminum Honeycomb Sandwich Panels

    Contact NowAluminum Honeycomb Sandwich PanelsAluminum Honeycomb Sandwich Panels Aluminum honeycomb panels are sandwich-structured composites with honeycomb cores. They are manufactured by using a variety of different materials, depending on the intended application and required characteristics, from paper or thermoplastics, used for low...

  • Non-Slip Aluminum Honeycomb Panels

    Contact NowNon-Slip Aluminum Honeycomb PanelsTheNon-slip Aluminum Honeycomb Panel is made of 1.5-2mm Non-slip Aluminum sheets and aluminum Honeycomb as the core. Since this panel is often used as floor and stage panels where high mechanical properties are required, the aluminum foil thickness is preferred at greater density than normal...

  • Aluminum honeycomb panels for canopy

    Contact NowAluminum honeycomb panels for canopyAluminum honeycomb panel with pvdf coating is an idea material for canopy.

  • Limestone Honeycomb Composite Panel

    Contact NowLimestone Honeycomb Composite PanelStone Honeycomb Panels are sandwich panels made up of a thin natural stone veneer reinforced with an aluminum honeycomb backing. The stone veneer can be almost any stone including granite, marble, limestone, travertine and onyx. 1) Face material: 3- 6 mm thick natural stone veneer / porcelain...