Honeycomb panels have been widely used for their excellent performance. The aluminum honeycomb panels are widely used in buidling curtain walls. Let's take a look at the introduction of aluminum honeycomb panels.
Common installation method for aluminum honeycomb panel curtain wall.
1. You can separate the lifting lugs from the honeycomb panel. The lifting lugs are separately processed and connected to the seam position of the honeycomb panel. The suitable width of the rubber seam is ≥12mm. This installation method makes the processing simple and easy to install.
2. You can install the flange when processing the aluminum honeycomb panel. It only needs to be connected with the keel and the seam at the time of installation. The suitable seam width is ≥10mm. This method is easy to install, but the processing is slightly complicated and is not suitable for modeling curtain wall panels.
3. This node is aluminum buckle type,and the buckle is a specific profile. Its installation is simple, but this method has high requirements on the processing precision of the plate, and it is not recommended to use the plate with the length more than 3000mm. According to the width of the buckle, the seam in the plate is 20mm and 40mm.
