1. In appearance, simply put, the aluminum veneer is a layer of aluminum plate, the aluminum-plastic composite plate is a sandwich of PVC between two layers of aluminum plates, and the aluminum honeycomb is a honeycomb-shaped aluminum sheet sandwiched between the two layers of aluminum plates.
2. In terms of cost, it can be seen from the materials that the manufacturing cost of aluminum honeycomb panel is the most expensive, followed by aluminum veneer, and finally aluminum-plastic composite panel, but it is made due to the different processing requirements of aluminum-plastic composite panel. There is a certain degree of change in cost. Aluminum honeycomb panels and aluminum-plastic composite panels require post-processing before they can be used, and the production process will generate waste, resulting in increased costs.
In terms of performance, it can be analyzed from three aspects: wind resistance, processing diversity, and service life:
(1) Wind resistance: Aluminum honeycomb panel is fixed in the entire surface because of its core layer distribution, which makes the plate more stable. Therefore, its wind resistance is much stronger than aluminum veneer and aluminum-plastic composite panel.
(2) Diversity of processing: Because the construction process of aluminum veneer and aluminum-plastic composite board is generally the same, but aluminum-plastic composite board has a greater degree of processing freedom, aluminum veneer and aluminum honeycomb panel are formed by the manufacturer, and the accuracy of the equipment Related, so in the variety of processing shapes, aluminum-plastic composite board is the best, followed by aluminum honeycomb panel, and finally aluminum veneer.
(3) Service life: As the material and processing technology of the surface coating are very different, PVDF fluorocarbon coating is used for the coating of aluminum veneer, which makes it excellent in performance in terms of service life. In contrast, fluorine used in aluminum-plastic composite panels Carbon resin coating, the service life is far less than aluminum veneer, easy to age and corrode; while the aluminum honeycomb panel uses fluorocarbon roll-coated aluminum plate processing technology, which also guarantees a certain degree of service life, which is basically the same as that of aluminum veneer same. But comparing costs, it is clear that aluminum veneer is more affordable.
