When purchasing and using honeycomb panels, honeycomb panels of different materials should be selected according to the specific environment.
The honeycomb panel material is designed and produced by aluminum alloy material through digital control and fluorocarbon spraying technology. From the perspective of aluminum alloy profiles, the hardness and strength of honeycomb sheet materials are good and tough, which follows the characteristics of aluminum alloy profiles. On the other hand, the appearance of fluorocarbon spraying technology is beneficial to maintain the aesthetics of the honeycomb panel material, has strong non-adhesion, is not easy to adhere to dust and other pollutants, and is easy to clean.
Because the honeycomb panel material has better corrosion resistance, some users think that it is actually designed and produced by pure aluminum material. In fact, honeycomb panels made of aluminum alloy materials have many different materials on metal materials. Because different materials have different effect characteristics, the honeycomb panel materials of different aluminum alloy profiles will be biased in nature. .
The materials produced by the honeycomb panel are various aluminum alloy materials such as aluminum-manganese alloy profiles and aluminum-magnesium alloy profiles.
The honeycomb sheet material made of aluminum-manganese alloy material has high strength and rigidity and stable properties. However, honeycomb panels made of aluminum-manganese alloy materials have weak oxidation resistance. If no additional surface coating technology is added, corrosion may occur for a long time.
The honeycomb sheet material made of the aluminum-magnesium alloy material has a certain strength and rigidity because it is added with a manganese metal component in the production. At the same time, it also has good oxidation resistance, and its corrosion resistance is stronger than that of aluminum-manganese alloy.
Ordinary aluminum alloy veneers have a relatively low metal content in terms of magnesium and manganese, and thus are weaker in hardness and strength than the former two. However, this type of honeycomb panel material has a bit, that is, the weaker hardness indicates that the material is soft and easy to process. If it is strengthened in thickness, it can still meet the basic needs of honeycomb panel materials.
