With the improvement of people's living standards, architectural decoration should be both beautiful and generous. As a decorative material, aluminum honeycomb panels is usually used as an aluminum honeycomb panel ceiling. Today HUARUI Honeycomb Company will tell you how to install an aluminum honeycomb panel ceiling.
Construction Points:
1. Measurement and release: The measurement and release follow the overall measurement and control procedures first, and then use the theodolite to release the horizontal control line of the ceiling keel according to the original structure axis. According to the data required by the standard, the ceiling elliptic curve arching is used as the basis. Arch control line for ceiling keel.
2. Use precision instruments such as electronic theodolite, laser leveler, and automatic leveling to make dynamic observations of the truss every two weeks, and the number of observations should be no less than 4 to ensure the accuracy of the final analysis data. Compare the observation data obtained each time to understand the latest deformation of the steel truss system. Based on the observed values, a dynamic deformation network diagram is drawn to analyze the deformation trend of the steel truss.
3. Ceiling arching measures are the partial pre-arching of the keel: due to the objective existence of the deflection of the steel keel, in order to minimize the influence of the deflection deflection on the flatness of the decorative surface of the ceiling, the keel adopts the local pre-arching method on the spot.
4. Connection method of gusset plate In order to ensure the stability of the overall steel truss structure, the connection method of steel keel and truss adopts hoop gusset plate and bolt connection. The ceiling main keel can adjust the height and left-right direction in the long oval hole of the gusset plate.
