Stainless steel honeycomb panels, aluminum honeycomb panels, stone honeycomb panels, and wood grain honeycomb panels are all high-quality products for building materials. Each honeycomb panel product has its application range and characteristics. Let's introduce the characteristics, processing methods, etc. of the aluminum honeycomb panel. The aluminum honeycomb panel is mainly made of high-quality 3003H24 aluminum alloy plate or 5052AH14 high-manganese aluminum alloy plate as the substrate, and the thickness of the panel is 0.8 ~ 1.5mm fluorocarbon roll-coated plate or light-resistant baking paint.
Color-resistant light paint is better than PVDF in terms of scratch resistance, resistance to acid rain and discoloration, and self-cleaning. The thickness of the bottom plate is 0.6 ~ 1.0mm, and the total thickness is 25mm. The core material is a hexagonal 3003 aluminum honeycomb core. The thickness of the aluminum foil is 0.04 ~ 0.06mm and the side length is 5 ~ 6mm. The roll forming technology is used to complete the forming of the front and back skins. The sides snap tightly.
The entire processing process of the Aluminum honeycomb panel is completed in a modern factory. Using hot-press molding technology, due to the high heat conduction value between the aluminum skin and the honeycomb, the thermal expansion and contraction of the aluminum skin inside and outside are synchronized; the honeycomb aluminum skin has small holes to make the board The internal gas can flow freely; the sliding mounting buckle system does not cause structural deformation during thermal expansion and contraction, so it can ensure extremely high flatness. Adhesive: two-component polyurethane high-temperature curing adhesive, compounded with fully automatic honeycomb panels The production equipment is compounded by pressure and high temperature, which overcomes the brittleness problem of the past honeycomb panel adhesive layer.
The inner layer of the Aluminum honeycomb panel is a hexagonal aluminum honeycomb composed of an aluminum alloy with a hardness of H19. As a core plate adhered to the sandwich structure, it bears pressure in the tangential direction. These dense honeycombs, which are restrained by each other, are like many small I-beams, which can disperse the pressure from the direction of the panel, make the panel uniformly stressed, and ensure that the panel can maintain a high flatness even in a large area.
