The aluminum honeycomb panel is composited by hot press forming technology, which is divided into three layers of bottom plate and panel plus honeycomb core. The aluminum honeycomb core flat supports the bottom panel, so that the plate will not be deformed under the alternating environment of hot and cold.
The surface color can be optional and can be customized. The shape is divided into flat and curved plates.
Introduction analysis
The aluminum honeycomb panel mainly adopts 3003 series aluminum alloy as the bottom panel, the thickness is 0.8-1.5mm, the honeycomb core thickness can be made up to 50mm, the load-bearing weight is 9/1 than its own weight, spray paint is used, and there is no problem for acid rain and weathering. The honeycomb core has a hexagonal shape with a thickness of 0.04-0.06 mm, and the maximum length can reach about 5-6 m. The honeycomb panel is like a whole, and the force of one point is dispersed to the whole plate, and the force is unloaded. This is also the display of the flatness of the board.
Installation method
Hanging type, flanging type, buckle type, each installation method has a unique method, the lifting ear type is simple and convenient, the flanging type is convenient to install, the processing is suitable for the flat plate is not suitable for the modeling board, and the buckle type installation is high. The required building use, its precision processing requirements are high, belonging to the engineering custom sheet, the installation method is also relatively simple and practical.
Production steps
Deep drawing, aluminum selection, customization, order opening,
Cutting - cutting - bending - coating - adding honeycomb core - coating - adding bottom plate - hot pressing - surface treatment - film - packaging, some production steps will also be different, some will choose to do surface treatment first, in processing Honeycomb core composite thermoforming. This makes surface preparation relatively easy.
Scope of use
(1) Building curtain wall exterior wall hanging board
(2) Interior decoration engineering
(3) Billboard
(4) Shipbuilding
(5) Aviation manufacturing
(6) Indoor partition and commodity display stand
(7) Commercial transport vehicles and container truck bodies
(8) Buses, trains, subways and rail vehicles
