Aluminum honeycomb panel is a more fashionable and gorgeous high-end exterior wall decoration material in recent years. It is a curtain wall material that does not use composites. It is made of thick aluminum plate. Its surface is sprayed with fluorocarbon. The color is colorful. The appearance is flat and bright. And it is not affected by ultraviolet, temperature, humidity and atmospheric corrosion, so aluminum veneer is not easy to discolor, and it is the first choice material for high-end buildings at present; aluminum veneer plate is clever, easy to install and has good resistance to bending and excellent wind pressure Sex. Aluminum veneer generally uses 2.0-3.0 thick plates according to the size of the partition and the height of the building. It is easy to process into various shapes. The technology of reinforcing ribs has improved the ability of the single-layer aluminum plate to withstand wind loads, so that the aluminum veneer can be made into Extra-conventional grid size, so welcomed by people from all walks of life.
Aluminum honeycomb panel refers to aluminum material with a thickness of more than 0.2mm to less than 500mm, a width of more than 200mm, and a length of less than 16m. It is called aluminum sheet or aluminum sheet.Aluminum is less than 0.2mm, and the width is 200mm. (Of course, with the advancement of large equipment, the widest can reach 600mm more discharge). Aluminum plate refers to a rectangular plate rolled by aluminum ingots. It is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium-thick aluminum plate, and patterned aluminum plate.
Aluminum honeycomb panel, suitable for civil buildings, car and ship decoration, etc. It is the application of aviation and aerospace materials in the field of civil construction. The entire processing process is completed in a modern factory. Hot-press molding technology is used. Due to the high thermal conductivity between the aluminum skin and the honeycomb, the thermal expansion and contraction of the aluminum skin inside and outside are synchronized. Flow; sliding installation buckle system will not cause structural deformation during thermal expansion and contraction.
